4 Ways to Prevent Leaks on House Roofs

Leaks on the roof of a house can occur due to several things such as for example the wind that blows so hard that it makes the tile to shift, the number of trees that bear fruit near the roof of the house and then the fruit falls so as to cause the tile to break or anything else.

For that, you must check regularly. If you have a shady tree close to the roof of your house, you should immediately trim the branches that hung down to the roof. You can trim it so that the risks of leakage on the roof can be avoided at least. You should also hire the best roofing Oshkosh service when installing or repairing your roof. So, your roof will be durable and long lasting.

This article will discuss how to prevent leakage on the roof of a house. Let’s look at the explanation together!

Avoid Planting Trees Too Close to Home

Planting trees too close to the house will trigger a leak on the roof of the house. Why is that? Trees that grow big, shady, dense, let alone bear fruit, will surely damage your roof if planted too close to the house. The part of the branches that grow dangling to the roof of your house if the wind blows will move, it will indirectly make your roof to be shifted from its original place so that it can trigger leaks.

Furthermore, if it is already bearing fruit, there is definitely a risk that the fruit will fall into the roof of your house and can make cracks or even break. Thus, if you don’t know, then when it rains your roof will leak.

Use a Roof that Uses a Waterproof System

From the word waterproof, we can already see that the meaning is to protect it from water. Now the same is true for a roof that uses a waterproof system, it is most likely not to experience problems such as leakage. The waterproof roof consists of various variations, types, and colors. You can choose according to taste and of course, adjust to the budget that you prepare. The waterproof roof is also very easy to find in the nearest building shops.

But if you decide to use a roof that has a waterproof system, of course, it must be balanced with the right and proper installation process. If the installation is from the origin the result will be the same, because a little gap will cause leakage on your roof. So, it needs to be fixed, this is tantamount to working twice. So, it’s best when installation must be done carefully.

Put the Plastic Under the Roof

Before installing the roof, you can give a plastic coating first. After the roof truss is made of wood or even mild steel, you can attach the plastic and proceed with the roof. This method has been carried out by many people, especially in rural areas whose land is still large, and of course, has a high risk of leakage on the roof due to strong winds blowing.

Unlike in urban areas, the area is already very dense, the risk of leakage certainly tends to be low. Even strong winds will be held back by the many buildings. But if you want to install plastic as a roof coating it would be better to prevent leakage.

Roofs Should Have the Right Slope Angle

How to deal with leakage on the roof of the house this time is also noteworthy. Roof installation should have the right slope because one of the causes of leakage on the roof of the house is the design of the roof that is too gentle. The sloping roof is only suitable for use or is applied to the design of a cast-based roof. By using a cast roof, it also needs to be coated with paint or liquid-based waterproof so that it does not seep and prevent leakage on your roof. However, for roofs with other materials, you must pay attention to the tilt angle first so that the water can flow smoothly when the rain comes.

Related posts